J21S SERIES DEEP-THROAT POWER PRESS, MESIN PUNCHING FITUR:
J21S seri general deep-throat press
Tambah tenggorokan jero lan wilayah kerja.
Adopts horisontal diselehake crankshaft.
Kopling ikatan rotasi kaku.
Pangaturan dhuwur tutup manual kanthi tampilan skala.
Jinis kanthi "A" dilengkapi piranti mandeg darurat, sing bisa nggawe slide mandheg ing 0 °～area 135 ° lan dilengkapi karo pelindung langsir cahya uga.
SPESIFIKASI:
| MODEL | J21S-6.3 | J21S-10 | J21S-16 | J21S-25A | J21S-40A |
| Kapasitas | kN | 63 | 100 | 160 | 250 | 400 |
| Pasukan Nominal | mm | 2 | 2 | 2 | 2.5 | 4 |
| Geser Stroke | mm | 35 | 60 | 70 | 80 | 120 |
| SPM | min-1 | 170 | 145 | 125 | 60 | 55 |
| Maks.Die Dhuwur | mm | 110 | 130 | 170 | 180 | 220 |
| Die Dhuwur Imbuhan | mm | 30 | 35 | 45 | 70 | 80 |
| Antarane Slide Center & Frame | mm | 700 | 700 | 700 | 700 | 700 |
| Gulung (FB×LR) | mm | 200×310 | 240×360 | 320×480 | 400×600 | 480×700 |
| Bukaan Bolster (Diameter Lubang Ndhuwur × Dpth × Diameter Lubang Kurang) | mm | Φ60 | Φ120×20×Φ100 | Φ100 | Φ120 | Φ220×25×Φ180 |
| Ketebalan Bolster | mm | 40 | 50 | 60 | 70 | 80 |
| Pembukaan Bolster (Dia.×FB×LR) | mm | Φ140×110×160 | Φ130×90×180 | Φ210×160×240 | 200×200 | 200×240 |
| Area Geser (FB×LR) | mm | 120×140 | 150×170 | 180×200 | 210×250 | 270×320 |
| Lubang Shank (Dia.×Dpth) | mm | Φ30×55 | Φ30×55 | Φ40×60 | Φ40×70 | Φ50×70 |
| Antarane Kolom | mm | 162 | 182 | 220 | 350 | 390 |
| Daya Motor | kW | 0.75 | 1.1 | 1.5 | 2.2 | 4 |
| Ukuran Outline (FB×LR×H) | mm | 1540×700×1525 | 1620×730×1800 | 1680×840×1880 | 1790×990×2288 | 1965×1180×2295 |
