Mesin Bubut Manual Metrik CD6240B
Fitur
Bore spindle gedhe 65mm
Utama spindle dinamis imbang, lan didhukung ing 2 TCTerms karo bantalan roller taper saka Harbinbrand
Tampilan njaba nampilake dhataran gedhe, nggawe mesin luwih apik
Cara amben gapped, kang frekuensi super-audio hardened
Kabeh Gir hardened lan lemah dening Reishauer mesin grinding
Leadscrew lan feed rod interlocked, loro karo pangayoman kakehan
Stopper feed otomatis
Variabel konfigurasi sakabehe miturut pesenan:
Sistem metrik utawa inch;Roda tangan tengen utawa kiwa;jinis pesawat gedhe;lampu halogen;Alat pangowahan cepet kepungkur;DRO;senyawa T-slot;njaga Chuck;hood leadscrew;Motor traverse cepet;Rem elektromagnetik;Sistem pelumasan paksa.
| AKSESORI STANDAR | AKSESORI PILIHAN |
| 3-jaw chuck Lengan tengah $center Dicekel bedhil lenga Manual operasi Istirahat mantep ikut istirahat 4-jaw chuck Plat pasuryan Dial thread Stop kontak longitudinal | Pusat urip Posting alat ganti cepet Taper copy ruler 4-posisi longitudinal tutul mandeg |
Spesifikasi
| MODEL | CD6240B | |
| KAPASITAS | Maks.ayunan liwat amben (mm) | 400 |
| Maks.ayunan liwat cross slide (mm) | 225 | |
| Jarak tengah (mm) | 1000, 1500, 2000mm | |
| Max ayunan ing longkangan (mm) | 530 | |
| Dawane longkangan sing sah | 260 mm | |
| Jembaré amben | 330 mm | |
| HEADSTOCK | bolongan Spindle | 65 mm |
| irung spindle | ISO-C6 utawa ISO-D6 | |
| Spindle taper | Metrik 70 mm | |
| Kacepetan spindle (nomer) | 22-1800rpm (15 langkah) | |
| FEED | Range benang metrik (Jenis) | 0.5-28mm (66 jinis) |
| Range Utas Inch (Jenis) | 1-56 / inci (66 jinis) | |
| Range benang modul (Jenis) | 0.5-3.5mm (33 jinis) | |
| Range benang diametral (Jenis) | 8-56 DP (33 jinis) | |
| Kisaran biaya longitudinal (Jenis) | 0.072-4.038mm/rev (0.0027-0.15 inch/rev) (66 jenis) | |
| Range feed silang (Jenis) | 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66jenis) | |
| Kacepetan lelungan kanthi cepet | 5m/min (16.4ft/min) | |
| Ukuran leadscrew: Diameter/Pitch | 35mm / 6mm | |
| KANGGO | Lintas slide travel | 300 mm |
| Perjalanan istirahat majemuk | 130 mm | |
| Ukuran cross-section saka toolshank | 25*20 mm | |
| TAILSTOCK | Taper saka tailstock sleeve | Morse No.5 |
| Diameter lengan tailstock | 65 mm | |
| Perjalanan lengan tailstock | 120 mm | |
| MOTOR | Motor penggerak utama | 4.0kw utawa 5.5kw utawa 7.5kw |
| Motor pump coolant | 0,125 kw | |
| Motor traverse cepet | 0,12 kw | |
| Ukuran kemasan (L * W * H) (mm) | ||
| Jarak tengah 1000mm | 2420*1150*1800 | |
| 1500 mm | 2920*1150*1800 | |
| 2000 mm | 3460*1150*1800 | |
